Sage 50 Error Update Must be Installed on Server First

Sage 50 Error Update Must be Installed on Server First

The article below has been written for users that are looking for solutions. We have presented here both the causes and methods to fix this error Sage 50 Error Update Must be Installed on Server First. If a user is trying to install a service release or an update on the server first, this error may occur.

Take the time to read the reasons and understand the issue, then implement the correct solution of the Sage 50 error update that must be installed on the server first.

What are the Causes of this Sage 50 Error Update Must be Installed on Server First

The main causes of Sage 50 must be installed on the server are as follows:

  • The server has already been updated (but just not updated), and the workstations are still on the earlier versions.
  • The service release that was installed on the server has not updated the necessary files.
  • Log in has not been done with Administrator access on the client computer.
  • An appropriate installation has been done.
  • There was no service release installed on the server.
  • There are many data paths on the server, and the client computer is pointing to the incorrect one.
  • An attempt has been made to install the incorrect operation’s release
  • This machine’s ini file was incorrectly formed.

What are the Steps to Fix the Sage 50 Error Update that Must be Installed on Server First?

Follow these given steps and we believe you will be correct on your end. Still, if you are facing a Sage 50 error update that must be installed on the server first, talk to us. First, let us have a glance at the below-mentioned steps.

Method 1: Properly update the install

  • The first step is to open Sage 50 accounting at the server.
  • Go to the help menu.
  • Select the option name “About Sage 50 Accounting”. 
  • When the Build or Release message appears, it means that the application has been updated. 
  • Close the Sage software.
  • Now, you will see the service release installed 
  • Confirm that the update will be enabled on the workstation once the installation is finished.

NoteIf the issue continues to remain, try out the next method.

Method 2: When datapath and local datapath do not match with the server. You have to take the following steps

  • Close the sage application
  • Then, Open the file explorer 
  • If you are using a 32-bit computer, locate the path first then the program files, and after that common files and then peach. 
  • Next, if you are using a 64-bit computer, locate the path first.
  • Then the program files and after that Common Files and then Peach.

Note: The INI file for Sage Peachtree 2019 and later may be found in path C: Program/DataStage/Peachtree.

  • The next step is to open the configuration file for the installed version of sage 50. 
    • Version 2013: Peachtree 200.ini
    • Version 2014: Peachtree 210.ini
    • Version 2015: Peachtree220.ini
    • Version 2016: Peachtree 230.ini
    • Version 2017: Peachtree 240.ini
    • Version 2018: Peachtree 250.ini
    • Version 2019: Peachtree 260.ini
    • Version 2020: Peachtree 270.ini
  • Look after the line starting with datapath and local datapath. 
  • If such paths don’t really fit, remove Sage and reinstall it, choosing the DATAPATH= location as the location of the data, and then reinstalling the update.
  • When the installation is complete, check that the update is now installed on the workstations; if an issue still remains, go to the next step.

Method 3: At the workstation or server, the data path is incorrect

  • Change the data path if the data path is not right.
  • Next, again run the update. 
  • If the data path on the server was incorrect, you must remove and reinstall to the right data path.
  • Install the update on both the workstation as well as on the server
  • If the data route was accurate, go to the next solution.

Method 4: Set up the server in a new data path

Below are the steps which will help you to set up the server in a new data path.

  • Go to the start menu and choose the Control Panel.
  • Now, go to Programs and Features, identify the Sage Accounts that you wish to uninstall, and then click Uninstall. 
  • For Windows XP, go to Add or Remove Programs and then identify the Sage Accounts that you want to get changed. 
  • Then press the Ok button.
  • If the error persists on your computer, uninstall all Sage versions and then click
  • Now, go to Programs and Features, right-click on the Sage account version, and then select Uninstall.
  • With Windows XP, go to Add or Remove Programs
  • Then identify the Sage Accounts that have to be uninstalled.
  • Press the Ok button.

In this article, you get to know the resolution process for Sage 50 update error must be installed on the server first that occurs commonly in the software. These types of errors sometimes become difficult to resolve by yourself. Rest, talk to us if you need any assistance knowing how to install Sage 50 on a shared server.

In the event of a serious issue, it becomes necessary to contact some IT experts and ask for help. We are here to help you. call Sage 50 support toll-free number via call or Chat.

Get solutions to all of your accounting and bookkeeping problems with industry leading experts

call to action img

FAQ’s

Is it required to reinstall the Sage 50 software, when you face an error Sage 50 Error Update Must be Installed on Server First?

Yes, you must reinstall it on your system in order to continue working on it. Many of the issues you are experiencing are resolved by reinstalling.

In Sage 50 error update how do you map a network drive?

Below are the ways to map a network drive:
Press the Start button.
Enter the input in the search box, then pick the computer from the results.
Click Computer, then Map network drive.
Select an available letter from the drive list in the popup that appears.
Enter the path to the shared network folder in the Folder box
You may also use the Browse button to locate the network folder you wish to map.
Finally, click on Finish.

How to change disable UAC in sage 50 error when an update must be installed on the server first?

Here you go:

In the Windows 10 search box, type the control panel.
To launch this app, select it from the list.
Navigate to User Accounts.
Then, modify the User Account Control options.
Slide the sliding control to the Never notify position.
To save the modification, click OK.


Call Now
Chat Now

Phone

+1-347-967-4078