Remove Sage 50 Completely- Uninstall

In this article, you will get a complete guide on how you can Remove Sage 50 Completely along with how to uninstall Sage 50 accounts and uninstall Sage 50 Payroll.

Sage 50 is popular accounting software that many small businesses use to keep track of their finances. But if you need to remove this software completely, you’ll need some help. And if you have come here because you are trying to Remove Sage 50 Completely from your computer, then that’s great. You’re on the right track.

What are the Challenges Faced while you Try to Remove Sage 50 Completely?

While you try to remove Sage 50 completely, then you can face some challenges. Here are some of the causes that you might face during the uninstallation process:

• All of the files have not been successfully removed.
• The Sage 50 file is used by another process or piece of software.
• The user does not have sufficient permissions to remove Sage 50.
• The uninstalling process could not be completed because the needed file could not be run.

What to do before you start to Remove Sage 50 Completely?

If you want to reinstall your Sage 50 Accounting program, make a note of your current software version and your activation information, and make sure to back up your registry. Here are the steps that you need to follow:

1. Check your current software version

To check your current version of Sage 50, follow these steps: 

If you can use the software, then:

• First, log in as a manager to Sage 50 accounting software. 
• After that Click 🖱️on the Help.
• Once on the help tab then go to About.
• Finally, note the Version Number in the left column of Program Details.

If you are unable to use the software, then:

• First, click on the Windows key + R on your keyboard.
• Then type appwiz.cpl and press Enter.
• Finally, look for the most recent version of Sage Accounts on the list, then note the version in the Version column.

2. Make a note of your activation details

You need to make sure your serial number is correct. To note down your activation details follow these steps:

• First, log in as a manager to Sage 50 accounting software. 
• After that click🖱️ on Help.
• Once done go to About.
• Now finally, in the Licence Information section, look for your:
  • Account Number
  • Serial Number
  • Activation Key

3. Backing up the complete registry or single registry key

To back up the complete registry or single registry key, follow these steps: 

• First press the Windows button and the R keys at the same time.
• Then enter Regedit and press OK.
• When you open the registry, you’ll see two panels.
• On the left panel, right-tap the registry key you want to back up and select export.
• Once done, select the preferred Export Range at the end of the export registry file.
• Then you should do the File renaming
• After you have renamed it, click🖱️the Save button.
• Finally, the registry key will be saved in the form of a .reg file.

Steps to Remove Sage 50 Completely

If you are having issues with your Sage 50 software, you may want to consider completely removing it. Here are some steps that will help get you there in no time: Follow these step-by-step instructions to remove Sage 50 completely.

Resolution 1: Using Windows, uninstall your software

To uninstall your software using windows, you need to follow the given steps:

• First to open the Control Panel, use Windows key + R, then type Control Panel and click OK.
• Then click🖱️ Programs and Features.
• Once you are done, then locate and right-click the Sage version you wish to uninstall.

Note: You can either rename or delete the accounts program directory after you've uninstalled Sage 50cloud Accounts. As a default.

• C: Program Files (x86)SageAccounts 📂 for the 64-bit operating system. 
• C: Program FilesSageAccounts for the 32-bit operating system.
• Once done, you need to click on Uninstall.
• Reinstall the software and see if you can recreate the problem.
• Finally, if the problem persists, go back to step 2 and delete all versions of Sage 50 before clicking Next.

Resolution 2: Delete shared files from the System32 folder

To delete shared files from the System32 folder, follow the steps mentioned below:

• First, navigate to 📂C: WindowsSystem32 by clicking Computer (For Windows 64-bit – Navigate to C: WindowsSysWOW64.)
• After that click View, then Details.
• You may need to press Alt to see the View option.
• Once done, right-click any column heading.
• Then select More, and check the Company box.
• After that🖱️ click OK.
• Now delete all files in the Company column that have any of the following names: Filename
  • Sage (UK) Limited
  • Sage (UK) Ltd
  • Sage
  • The Sage Group plc
  • Sage Software Ltd

• To sort the list by company, 🖱️ click the company column heading.
• Sage files can then be deleted in batches rather than individually.
• Delete the files listed below.

SageBankBalances.tlb		SageBankPayments.tlb	SGSchemeXml.dll
SGSchemeXP.dll		SageBankReconciliation.tlb	SageEBanking.tlb
Sg50Ps32.dll		SGCOM32.DLL	SGCtrlEx.dll
SGDT32.DLL		SageEventHandler.Config	SageEventHandler.exe
RepDes32.exe		repdes.cnt	SageFolderBrowser.dll
SG3D32.DLL		SgHmZLib.dll	SGINTL32.DLL
SgESchema.xsd		SGHELP32.DLL	SGJPEG32.dll
SGLCH32.DLL		SGLCH32.USR	SGLIST32.DLL
SGLOGO32.DLL		SGOEdit.ocxv	SGOList.ocx
SGOPopDg.dll		SGOTBar.ocx	SGRegister.dll
Sgopopup.ocx		SGOSize.ocx	SGRegister.tlb
SGRep32.dll		SGTOOL32.DLL	SGWebBrowser.dll
SGSchemeDefault.dll		SGSchemeManager.dll	SGSTAT32.DLL
SGSTDREG.dll		SGStdReg.tlb	SGTBAR32.DLL

Resolution 3: Shared folders should be deleted

To Delete the shared folders, follow these steps:

• First, browse to and right-click each of the folders listed below in the table.
• Once done, then click delete to delete the folder.

Note: These folders are located in 📂C:Program Files instead of C:Program Files if you are using a 32-bit operating system (x86).

  Name of the Folder 

• C:\Program Files (x86)\Common Files\Sage Report Designer 2007
• C:\Program Files (x86)\Common Files\Sage Shared
• C:\Program Files (x86)\Common Files\Sage SBD
• C:\Program Files (x86)\Sage EBanking
• C:\Program Files (x86)\Common Files\Sage Line50

Resolution 4: Delete Sage files that are shared

To delete the sage files that are shared, follow the steps that are mentioned below:

• First, browse to the file for each of the files listed below, then to ensure it’s a Sage file:
  • First, right-click 🖱️the file.
  • Then Properties
  • After that go to the Version tab.
  • Now select Company Name.
  • Once done, confirm the company name is Sage (UK) Limited or Sage.

• Now if the file is a Sage file, you can uninstall it by right-clicking it and selecting uninstall.

• Then if they won’t uninstall, press Windows key + R and type in the following paths, removing any files and folders named Sage.
  • C:\Windows\Assembly\GAC 📂
  • C:\Windows\Assembly\GAC_32
  • C:\Windows\Assembly\GAC_MSIL
  • C:\Windows\Microsoft.NET\assembly\GAC_MSIL

• Delete the following folders from
  • C:\Windows\Microsoft.NET\assembly\GAC_MSIL. 
  • SgEData
  • SgELauncher
• Finally, navigate to C: WindowsSystem32 and delete the following files:

Sage Accounts version– All versions	Files to delete– sdoEng. Where * can stand to anything. For example, sdoEng220.tlb
27	S27DBC32.dll and sg50SdoEngine270.dll
26	S26DBC32.dll and sg50SdoEngine260.dll
25	S25DBC32.dll and sg50SdoEngine250.dll
24	S24DBC32.dll and sg50SdoEngine240.dll

Resolution 5: Removing DSN and ODBC data sources

To remove DSN and ODBC data sources, follow these steps:

• First, log on to the computer as an administrator. 
• Now to access the ODBC Data Source Administrator window, follow these steps:
  • Windows 32-bit – Press Windows + R, then type ODBCAD32 and🖱️ click OK.
  • Double-click C:WINDOWSSYSWOW64ODBCAD32.EXE on 64-bit Windows.
• Finally, remove any Sage Line 50 entries from the User DSN and System DSN tabs.

Note: If you installed the 64-bit ODBC driver separately, you must also uninstall it from folder

• C:\WINDOWS\System32\odbcad32.exe.

Resolution 6: .NET should be removed

To remove .NET, follow the steps that are mentioned below:

• First, uninstall .NET starting with the most recent version number:
• Press the Windows key + R, type Control Panel, and then click OK.
• Click Programs and Features, then locate and right-click the version of.NET you want to uninstall, and then click Uninstall.
• Windows XP: Go to Add or Remove Programs, find and select the version of.NET you want to uninstall, and then🖱️ click Remove.
• Click Uninstall, then Next, and finally Yes.
• Steps 2–4 must be repeated for each version of the Microsoft.NET Framework.
• Finally, reinstall each version of.NET, beginning with the most recent.

Note:
● Uninstall all subsequent versions before reinstalling them in the correct order.
● Microsoft.NET cannot be removed from Windows Vista.
● Framework 3.0 or lower is required because it is part of the operating system.
● Microsoft.NET Framework 3.5 or lower cannot be removed from Windows 7; it is a component of the operating system.

Resolution 7: Uninstall from the Programs and Features menu

To Uninstall from the Programs and Features menu, follow these steps:

• First, select Programs and Features.
• Now for use with Windows 7 or Vista
  • Go to the start menu.
  • Then enter and uninstall the program.
• Once done, hold the Windows Key and X together and select Programs and Features in Windows 8, 8.1, or 10.
• Now, go to Sage 50 and select uninstall to begin the process.

Resolution 8: Uninstall Sage and all products completely

To Uninstall Sage and all products completely, follow these steps:

• First, make a backup of all your data on an external device or a USB stick. (For a step-by-step procedure, please see our website.)
• After that, navigate to Control Panel and select Programs and Features.
• Finally, locate Sage 50 and press the uninstall button.

Remove Sage 50 Newer Version and Reinstall the Older Version

There will be a new version of the Pervasive Database, now known as Actian Zen, in case you are using Sage 50 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, or newer 2023. You cannot install an earlier version of the software side by side with the latest version on the same computer after the latest version has been installed. Must uninstall the current version before the earlier version can be installed on another computer.

You can return to the downloaded software version by following the instructions below.

• First, you have to close Sage 50.
• Select Add/Remove Programs or Programs and Features from the Control Panel.
• Sage 50’s current version should be uninstalled.
• The installation files for the desired version should still be on your hard drive (the default location is C:Sage).
• If you initially installed them through a download, they should remain there.
• If you converted your data to the newer version before installing, you should restore the backup that was created during the conversion.
• Again Install Sage 50.

When you try to remove Sage 50 fully from your system using a CD or Windows, some files and directories remain in the system that is not immediately erased. Because these files and directories are shared with other applications or software, this occurs. And while uninstalling Sage 50, you may encounter errors such as network errors occurring while connecting with the connection manager and others.

Now that you have a complete guide on how you can Remove Sage 50 Completely, you can easily follow the steps and remove it without getting any errors. However, if you are still stuck or have any queries then you can reach out to the Sage 50 consultant helpdesk for easy and quick assistance.

Frequently Asked Questions